A long serving member and Past President of the Rotary Club of Wanganui inc was the late Ron Russell . He was inducted into the club in June 1946. Sometime back before his death, he approached Rotary International, through the General Secretary, seeking information about the Rotary Wheel and the legend surrounding it. All the information he got, was the official evolution story, of the wagon wheel, eventually becoming the gear wheel, we now know. No legend, no story.

Ron Russell then set out to encapsulate the meaning of the Rotary Wheel, and his little sermon was presented, posthumously, at a club meeting . Here is the lesson for your perusal and use.


We start with the perimeter, with the 24 teeth. These could be seen as the clubs, each prepared and willing to engage with other clubs, or organisations, around the world.With the object of doing good. They could also be seen, as pointing outwards, to the many directional activities of Rotary, through its wide variety of international programmes.


The solid band in blue and gold, which supports the teeth, gives the strength which is needed to transmit the power, and hold the Rotary movement as one. It carries the inscription "Rotary International". It had four segments which could represent the four avenues of service. The six spokes bind together the hub and the rim. They may be seen as the Districts, moving the power, from its source, to the working elements, which are the teeth, representing the clubs.Why six spokes? Well this divides the twenty four teeth, to give us a reminder, of the four way test.

Now all this has a strong mechanical, engineering conotation. One can almost feel the grease between thumb and finger, and smell the hot oil from the bearings. Like all things mechanical, we can get failure, or partial failure. A common failure could be caused by slippage. Slippage haunts us,still, in this computer age. Indeed it can be so severe that the whole exercise can fail and disapear. With our Rotary wheel, this is most likely in two areas. One, a failure of the teeth, that is, the clubs, to engage with others to good purpose, Two, more importantly, failure to have the key in the keyway, or only partially so. This can slow down the whole movement, or cause it to chatter, to run unevenly, and reduce the effectiveness of the clubs. In the Rotary setup, slippage is quite easy to detect. As it develops, we can all become aware of it. We can feel the slippage when we come to a poorly attended meeting, when the meeting is subdued, and lacks vitality. There is further, very obvious slippage, when a number of members leave the meeting, before the speaker starts. Then, of course, there is the fireside, or commitee meeting, with an attendance of only a fraction of its members. Or the undermanned club project. All are evidence of slippage, and all affect performance.

When we accept that part of the symbolism, which puts the Rotarian in the keyway, then, no matter what interpretation we put on the rest of the wheel, the whole thing depends on you, the Rotarian. you may not always be able to be "in the slot" but you should know that you will be missed, because no one else, can make your unique contribition.


The Rotary wheel emblem is a good one. It is designed for work and involvement. The Rotary movement is a world wide one, of real significance, and tremendous potential. It has impressive statistics as to numbers of members, clubs, districts, and countries, international projects and contacts. It is possible, that with the warm fuzzies, which the big picture evokes, we may be losing sight of the importance of the individual.


Perhaps, in our fascination with the whole movement, and its emblem, we should refocus our attention, on the small slot, the keyway, in the middle, and the importance of those who fill it, and whom we invite to fill it.